|
|
|
Interface to Mitutoyo and Mitutoyo-compatible
Gauges
 |
Attaches
to any Digimatic instrument: digital Dial Indicator, Caliper, Micrometer, Bore
Gauge, Height Gauge, Depth Gauge, Torque meter, etc. Also works with
Mitutoyo-compatible gauges and indicators such as:
- Mahr Federal* - Maxum and
uMaxum
- VersaGage
- CDI
Logic
- Starrett
Wisdom
|
- Chatillon DFIS
- Fowler Ultra Logic
- Dimension Air
|
|
|
Works with the standard Mitutoyo Digimatic SPC cable for your gauge.
The 10-pin connector on the adapter fits standard Mitutoyo SPC
cables. |
|
Intelligent interface -
a 16-bit microcontroller manages signals to and from the gauge,
and decodes gauge output for easier processing on the host
computer.
|
|
AutoWake™ technology
monitors the gauge even when the Palm is turned off. The
DataGet adapter turns the Palm on when you send a measurement from the gauge.
|
|
Request data to be sent from the
Palm if your gauge does not have a data button
|
|
Does not require
batteries - the
Palm supplies the power
for the adapter.
|
Support for the Meazura Palm.
For a rugged, industrial-strength solution, the DataGet
intelligent interface connects virtually any Mitutoyo Digimatic gauge to your
Meazura Palm. The
DataGet adapter connects to the HotSync port on the bottom of the
Meazura.
 |
Built tough
to IP67 standards. Drop and shock resistant. Dustproof and
waterproof. |
|
Replaceable, rechargeable battery pack. Built for continuous
use. |
|
Features the reliable, easy to use, yet powerful Palm OS. |
|
Build for
commercial and industrial applications. Long Product Life - will
not become quickly obsolete. |
|
Barcode
scanner available. |
note: Not compatible
with some Mahr indicators
Use part #D021000 when
ordering. Package includes adapter and connector to Palm.
|
|
Support for the Janam.
Rugged, industrial-strength
handhelds with built-in barcode scanners
|
Built
tough to IP54 standards. Drop and shock resistant.
Dust and water resistant. |
|
Replaceable, rechargeable battery pack. Built for continuous
use. |
|
Features the reliable, easy to use, yet powerful Palm OS. |
|
Build for
commercial and industrial applications. Long Product Life - will
not become quickly obsolete. |
|
more... |
note: Not compatible
with some Mahr indicators
Use part #D031000 when
ordering. Package includes adapter and connector to Palm.
|
 |
Support for Palm Universal
Connector:
m125, m130, m500, m505, m515 and i705, Tungsten T, T2,
T3, C and W, Zire71
The DataGet interface is housed in a
sled which clips to the bottom and back of your Palm.
The 10-pin
connector is at the top of the sled, and need not be removed to HotSync.
Use part #T099020 when ordering.
Package includes software and sled.
Sorry, this does not work with the Palm
m100 and m105, or Zires other than the 71.
|
|
DataGet BCD cartridge for the Visor:
Our DataGet BCD cartridge is the first gauge interface for the HandSpring Visor.
The DataGet BCD cartridge is also the first gauge multiplexer for a Palm computer. You'll appreciate this when you have to switch between gauges while measuring parts.
Comes in 1 or 2 channel configurations
The unique, low power design comes from a custom chip designed specifically for the handheld market. With a robust design, and cables coming out of the top of the unit, the DataGet
Visor cartridge is the ideal choice for wearing on a tool belt. No
need to remove the cartridge to sync your data.
Use part #T099100 or T099101 when ordering.
Download the Spec sheet from our downloads
section.
|
|
DataGet connector for the Palm III:
Works with Palm III, VII, Pro
and the Symbol 1500
The DataGet Palm III gauge Mitutoyo Interface connector has been redesigned.
The adapter cable attaches to the bottom of your Palm, and is easy to
remove for syncing your data back to the PC.
Use part #D099001 when ordering
- Limited to
stock on hand - |
|
|
|
|
|
