Interface to Mitutoyo and Mitutoyo-compatible Gauges

Bring SPC inspection and audit capability to the machine shop or manufacturing floor.  QC (Quality Control) becomes another Machine Tool in your arsenal.

• Connect to virtually any Mitutoyo Digimatic or Mitutoyo compatible gauge  - such as Mahr Federal and VersaGage. Connect to the Mitutoyo Digimatic SPC interface with the standard Mituotoyo SPC cable
• Connect to different types of gauges - such as: Digital Dial Indic.ator, Caliper, Micrometer, Bore Gauge, Height Gauge, Depth Gauge, Torque meter, etc.
• Does not require batteries.  The DataGet adapter is powered entirely from the USB connector, and uses extremely low amounts of power.  The gauge interface circuitry uses components designed for handheld/mobile applications, and will not drain your laptop's battery.
• Intelligent interface - manages signals to and from the gauge, and translates BCD data from the gauge for use by the PC/Laptop software.
• Works with the standard Mitutoyo cable for your gauge.  Uses a standard USB interface cable. No additional adapters required.
• Use multiple adapters to attach multiple gauges.  Map specific variables to specific adapters/gauges.  Mix different gauge types - such as Calipers and Depth gauge. Mix English and Metric gauges, the software automatically converts.  Easily configure your system for specific jobs. Makes sure that your measurements are taken with the correct gauge.
• Data reading can be triggered from the PC/Laptop.  Works with any USB or PS/2 footswitch that simulates a keypress.
• Together with the DataGet software, turns your PC, Laptop or Tablet (or Origami) computer into a sophisticated SPC Data Collection system.  Automates your Inspection Plan.
• This is a complete data collection system.  No custom programming is required. No yearly costs.